I-Light Pro 4-in-1 Dental Curing & Caries Detection Light

1 in 3 Curing Lights May Not Deliver the Energy Your Composite Requires

Studies conducted across working dental practices found that nearly one-third of curing lights failed to deliver even half the energy required by modern composites.

In one evaluation of 915 curing lights across 422 dental offices, measured output ranged from 157 mW/cm² to more than 12,000 mW/cm².

Another study of 200 curing lights in daily clinical use found that average output was approximately 19% below the manufacturer's specifications, while lights with damaged or resin-contaminated tips performed 35–40% below their rated output.

The problem?

You can't tell by looking at the restoration.

A restoration may appear completely cured on the surface while remaining inadequately cured beneath.

And considering that restorative procedures represent a significant portion of daily clinical work, the reliability of your curing light matters.

i-Light Pro™ Checks Itself Every Day

The intelligent charging base isn't just a charging station.

It's also a built-in light meter.

Simply place the curing tip on the sensor and read the output directly from the display.

You'll know exactly when performance begins to decline instead of discovering the problem months later through remakes or postoperative complications.

A standalone dental radiometer can cost $450–$2,000.

With i-Light Pro™, it's already included.

Magnetic Lenses. Changed in One Movement.

Traditional attachments require threading, tightening, and additional handling.

i-Light Pro™ uses a magnetic lens system that allows you to change lenses instantly—even while wearing gloves.

Each lens snaps securely into place, allowing you to adapt the curing geometry during different stages of the same procedure.

Point Cure Lens
Local curing for porcelain veneers.

• Spot-cure veneers
• Remove excess cement
• Complete final polymerization afterward
• Check tooth cracks in Detect Mode

Proxi Cure Ball Lens 1 & 2
Interproximal curing.

• Improved access to gingival margins
• Designed for Class II restorations
• Better access to areas commonly affected by secondary caries

Endo Guide Lens 1
Hard-to-reach areas.

• Distal surfaces
• Posterior teeth

Endo Guide Lens 2
Narrow spaces.

• Fiber posts
• Flowable resin applications
• Deep cavity access

Reach Posterior Teeth Without Asking Patients to Open Wider

The 360° rotating handpiece and angled head improve access to difficult areas.

The design reduces the required opening angle while allowing better positioning during posterior procedures.

At only 102 g, the handpiece remains lightweight, balanced, and comfortable throughout treatment.

Seven Modes Designed Around Real Clinical Procedures

Standard Mode — 1,000 mW/cm²
5, 10, 15, and 20-second cycles for routine anterior and posterior restorations.

Turbo Mode — 1,500 mW/cm²
3 and 6-second cycles for faster layering.

Super Mode — 3,000 mW/cm²
1-second tack curing for veneers and matrix bands
3-second orthodontic bonding

Ortho Mode — 1,000 mW/cm²
Designed for full-arch bracket bonding.

Ramp Mode — 0–1,000 mW/cm²
Gradual light intensity to help manage polymerization shrinkage stress.

Pulse Mode — 1,000 mW/cm²
Pulsed light delivery for heat-sensitive procedures.

Detect Mode
Dedicated violet light for caries detection and clinical examination.

For Definitive Restorations, Think in Joules—Not Seconds

Most composites require approximately 12–24 J/cm² for every 2 mm increment, with darker and more opaque materials often requiring additional energy.

Energy (J/cm²) = Irradiance (W/cm²) × Time (s)

A shorter curing time is only effective if the actual irradiance reaching the restoration matches the expected output.

Distance, angulation, tip contamination, and equipment wear can all reduce irradiance.

That's why the integrated light meter matters.

Instead of relying on numbers printed on a package, you can verify your curing light's actual performance every day.

Detect Mode

A dedicated violet-light examination mode allows for caries detection and evaluation without switching to another device.

One instrument.

One button.

Multiple clinical applications.

What's Included

• 1 × i-Light Pro™ Wireless Dental LED Curing Light
• 1 × Contra-Angle Handpiece Head
• 1 × Intelligent Charging & Light Measurement Base
• 1 × Magnetic Lens Set
• 1 × Power Adapter
• 1 × Protective Shield
• 1 × User Manual

Technical Specifications

We’re confident in the quality of our tools and want you to be, too. That’s why we offer a 30-day satisfaction guarantee with every purchase. If for any reason you're not completely satisfied within the first 30 days, simply reach out to us — we’ll work with you to resolve the issue through a return, exchange, or support. Your trust means everything, and we’re here to ensure you feel confident with every order.